manualshive.com logo in svg

ABB DPA 250 S4, Operating Manual

Share
Download
ABB DPA 250 S4 Operating Manual Download Page 108

108

DPA 2 50 S 4  50 - 2 50 K W 

O P ER AT I N G  M A N UA L

The small (125x70 mm) External SNMP adapter 
comes with following interfaces:

1. RJ-45 connector for 10/100 Base-T  

(auto-switchable)

2. Serial Port for configuration (COM2) or  

optional ModBus interface.

3. Error/Link LED for UPS status
4. Aux Port
5. DIP Switch
6. Serial Port to the UPS (COM1)
7. DC Supply (9 VDC or 9-36 VDC supply, 

depending on model)

The Internal SNMP-Card can be inserted into an 
appropriate extension slot of the PMC. This 
adapter communicates via the serial port of the 
UPS and makes a direct multiple server shut down 
possible without additional SNMP management 
software.

For detailed information please refer to the Soft-
ware Manual provided with the PMC-Software CD 
ROM. RCCMD - Remote Console Command mod-
ule for a multi-server shutdown. This standalone 
software module is designed to receive and exe-
cute a command issued by a remote device. 
Thanks to RCCMD it is possible to execute a shut-
down in a heterogeneous multi-platform net-
work. The new release RCCMD2 is an application 
available for all Operating Systems, analogous to 
PMC-Software. Our SNMP Interfaces are compati-
ble with RCCMD.

—
15.1-3: CS141 
advanced box

—
15.1-3

—
15.1-4: CS141 
advanced slot

—
15.1-4

15.1.1  CS121 basic

For interfacing the UPS with the network without the need for additional sensors or interfaces. Avail-
able in slot and box formats.

Supports the following protocols
SNMP, Modbus TCP,HTTP ModBus TCP, Telnet FPT, SMTP (e-mail)

.

—
15.1.1-1: CS141 advanced

—
15.1.1-1

Summary of Contents for DPA 250 S4



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands