ABB CoriolisMaster FCM2000, Operating Instruction

Page: 10 / 104

1 General Safety Information, Regulated Operation
10 FCM2000 D184B111U02
d) Type Plate Converter with ATEX-Approval
d) Type Plate Converter with FM-Approval
1.1.7 Personnel Qualifications
The electrical installation, start-up and maintenance of the instrument should only be performed by trained
personnel who have been authorized to perform these tasks by the system operator. This personnel must
have read and understood this Operating Instruction and follow its instructions.
1.1.8 User Responsibilities
• Prior to use for metering corrosive or abrasive fluids, the user must consider the resistance of the fluid
wetted parts. ABB will gladly provide assistance in their selection, however cannot not accept any liabil-
ity for their selection.
• Observe the National Codes in your country relative to the installation, functional tests, repair and main-
tenance of electrical equipment.
• ATEX-Approval
• ATEX-Temperature Classes
• Order Number
• Complete Model Number
• Supply voltage and maximum power
• Meter size and Protection Class
• Ambient temperature
• Process connections and pressure rating
• Meter pipe material and calibration factor
• Calibration accuracy
• Maximum flowrate and TAG-Number
• FM-Approvals
• Order Number
• Complete Model Number
• Meter Size
• Protection Class
• Ambient temperature
• Supply voltage and maximum power
• Process connections and pressure rating
• Meter pipe material and calibration factor
• Calibration accuracy
• Maximum flowrate and TAG-Number
! i
ABB Automation Products GmbH
37070 Göttingen – Germany
FCM2000 MC27
0032
Order no.:
Model-no.:
U/f nom:
Tamb:
Size:
000349252 / X004
MC27B11H65F11CE_AB0K
24V ac/dc Smax: <12VA
-20°C…+60°C
“H” (DN50) / IP67
Fitting:
Material: K:
Kal.:
Qmax DN:
DN 65 / PN 40
1.4571 72,753
F: +/-0,15% D: +/- 5g/l
920 kg/min
TÜV 99 ATEX1443 X
II 2D T115°C…Tmed IP67
II 2G EEx emd [ib] IIC T6
Tmed = 150°C bei Tamb = 40°C
Tmed = 140°C bei Tamb = 50°C
Tmed = 80°C bei Tamb = 60°C
Electrical data, ignition class of output circuits and
temperature classes, see EC-Type Examination Certificate.
TAG-Nr.: FT–402
X
~
–
! i
ABB Automation Products GmbH
37070 Göttingen – Germany
FCM2000 MC27C
Order no.:
Model no.:
Size:
Type:
Tamb:
U/fnom:
seal all condults within 18 inches 000342641 / X002
MC27C11H50P11IE_AB1G
“H” (DN50)
4X, IP67
-20°C…+60°C
115–230V~ / 50–60Hz Pmax: <25VA
Fitting:
Mat.:
Kal.:
QmaxDN: DN 50 / 150 lb
1.4571
F/R: +/-0.15%
920 kg/min
Class I, Div 1, Groups B, C, D;
Class II, II, Div 1, Groups E, F, G;
Class I, II, Div 2, Groups A, B, C, D, F, G
Class II, Div 1, 2
Class I, Zone 1, Group IIB,
Class I, Zone 2, Group IIB XP-IS:
DIP:
NI:
K: 91.003
D: +/- 5g/l
TAG-no.: PX–136
APPROVED
FM