ABB CoriolisMaster FCM2000, Operating Instruction

Page: 53 / 104

D184B111U02 FCM2000 53
6.6.14.4 Density for Current Output Value 0 %
In this menu the density value is entered for which the current output is to indicate its 0 % value (0 mA or
4 mA). The menu is only displayed when the current output is based on the density.
Minimum: 0.5 g/cm
3
Maximum: 3/5 g/cm
3
The density value for a current output value of 100 % must be at least 0.01 g/cm
3
larger than the density
value for a current output value of 0 %.
6.6.14.5 Density for Current Output Value 100 %
In this menu the density value is entered for which the current output is to indicate its 100 % value (20 mA).
The menu is only displayed when the current output is based on the density.
Minimum: 0.5 g/cm
3
Maximum: 3.5 g/cm
3
The density value for a current output value of 100 % must be at least 0.01 g/cm
3
larger than the density
value for a current output value of 0 %.
6.6.14.6 Temperature for Current Output Value 0 %
In this menu the temperature value is entered for which the current output is to indicate its 0 % value (0 mA
or 4 mA). The menu is only displayed when the current output is based on the temperature.
Minimum: -50 °C
Maximum: 180 °C
The temperature value for a current output value of 100 % must be at least 10 °C larger than the temperature
value for a current output value of 0 %.
Density
→
l = 0 %
500.00 g/l
Density
→
l = 100 %
800.00 g/l
Temp
→
l = 0 %
10.0 °C
, independent of the selection,
6 Converter