ABB AC500 PLC Hardware Manual Download Page 69

Page: 69 / 1315

1.2.2.1.3 Connections

All terminals for electrical connection are available on the terminal base. For information on con-

nection and available interfaces see the descriptions for

● TB511

Chapter 1.1.1 “TB51x-TB54x” on page 4

● TB541

Chapter 1.1.1 “TB51x-TB54x” on page 4

1.2.2.1.4 Storage Elements

The processor modules are supplied without lithium battery. It must be ordered separately. The

TA521 lithium battery is used for data (SRAM) and RTC buffering while the processor module is

not powered.

See

AC500 Battery

The CPU monitors the discharge degree of the battery. A warning is issued before the battery

condition becomes critical (about 2 weeks before). Once the warning message appears, the

battery should be replaced as soon as possible.

The technical data, handling instructions and the insertion/replacement of the battery is

described in detail in chapter

TA521 Lithium Battery

AC500 processor modules are supplied without memory card. It must be ordered separately.

The memory card can be used

● to read and write user files
● for firmware updates

Detailed information can be found in the

System Technology chapter

AC500 processor modules can be operated with and without memory cards. The processor

module uses a standard file system (FAT; filenames stored in 8.3 format, on memory card). This

allows standard card readers to read and write the memory cards (MC502).

Only genuine MC502 memory cards are supported.

For more information on the technical data, handling instructions and the insertion/replacement

of the memory card, please refer to the chapter Memory Card

MC502

Lithium battery

Purpose

Memory Card

Device Specifications

Processor Modules > AC500 (Standard)

2019/04/17

3ADR010121, 13, en_US

Summary of Contents for AC500 PLC




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AC500 PLC

Reviews:

ABB AC500 PLC, Hardware Manual, Page: 69 / 1315

Search results

Summary of Contents for AC500 PLC

Reviews: