ABB AC500 PLC Hardware Manual Download Page 11

Page: 11 / 1315

NOTICE!
Risk of corrosion!

Unused connectors and slots may corrode if XC devices are used in salt-mist

environments.

Protect unused connectors and slots with TA535 protective caps for XC devices

TA535

Chapter 1.8.4.6 “TA535 - Protective Caps for XC Devices”

on page 1172

Terminal bases TB5x3-2ETH for processor modules PM5xx-2ETH do not pro-

vide an FBP interface.

1.1.1.3

Technical Data

The System Data of AC500 and S500

Chapter 2.6.1 “System Data AC500” on page 1248

are

valid for standard version.

The System Data of AC500-XC

Chapter 2.7.1 “System Data AC500-XC” on page 1309

are

valid for the XC version.

Only additional details are therefore documented below.

Parameter

Value

Connection of the supply voltage 24 VDC

at the terminal base of the processor

module

removable 5-pin terminal block spring type

Slots

TB511: 1 processor module, 1 communication

module

TB521 / TB523: 1 processor module, 2 communi-

cation modules

TB541: 1 processor module, 4 communication

modules

Processor module interfaces at TB5x1

I/O bus, COM1, COM2, FBP

Processor module interfaces at TB5x3

I/O bus, COM1

Processor module network interfaces

TB5x1-ETH / PM5xx-ETH: Ethernet

TB523-2ETH / PM523-2ETH: 2x Ethernet

TB5x1-ARCNET / PM5xx-ARCNET: ARCNET

Net weight (terminal base without pro-

cessor module)

TB511: 175 g

TB521: 200 g

TB541: 250 g

Mounting position

Horizontal or vertical

Device Specifications

Terminal Bases (AC500 Standard) > TB51x-TB54x

2019/04/17

3ADR010121, 13, en_US

Summary of Contents for AC500 PLC




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AC500 PLC

Reviews:

ABB AC500 PLC, Hardware Manual, Page: 11 / 1315

Search results

Summary of Contents for AC500 PLC

Reviews: