manualshive.com logo in svg

ABB AC500 PLC, Hardware Manual, Page: 49 / 1315

Share
Download
ABB AC500 PLC Hardware Manual Download Page 49

1.2.1.3 

Onboard I/Os in Processor Module PM56x

● 6 DI 24 VDC
● PM56x-T(P): 6 DO (24 VDC, 0.5 A max. transistor outputs)
● PM56x-R(P) and PM56x-R(P)-AC: 6 DO (24 VDC or 120/240 VAC, 2 A max. relay outputs)
● 2 AI (voltage 0 V...10 V)
● 1 AO (voltage 0 V...10 V or current 0 mA...20 mA / 4 mA...20 mA)

Terminals of onboard I/Os for PM56x-T(P)

Terminals of onboard I/Os for PM56x-R(P)

and PM56x-R(P)-AC

AC500-eCo processor modules are equipped with non-removable terminals.

AC500-eCo processor modules are equipped with removable terminal blocks

which must be ordered separately.

The electrical functionality of both processor modules is identical.

1.2.1.3.1  Intended Purpose

The processor module PM56x provides 6 onboard digital inputs (24 VDC), 6 onboard digital out-

puts (depending on variant 24 VDC transistor outputs or relay outputs), 2 onboard analog inputs

(voltage 0 V...10 V) and 1 onboard analog output (voltage 0 V...10 V or current 0 mA...20 mA / 4

mA...20 mA). The onboard analog inputs can be configured as digital inputs, so 8 onboard dig-

ital inputs may be available if no analog inputs are needed.

Numbers and types of the onboard I/Os are listed in the table below:

Processor

Module PM56x

 

Device Specifications

Processor Modules > AC500-eCo

2019/04/17

3ADR010121, 13, en_US

49

Summary of Contents for AC500 PLC




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments