Solares
TM
Smart Spa Parts Manual
CD0039
30
Rev:1121
Replacement Instructions
1.
Switch off tub power using power switch on electrical box or unplug tub from wall.
Warning!
Failure to do so could result in electric shock!
2.
Remove bolts to free switch from frame.
3.
Open the front panel by loosening the screw and pulling up on the panel.
4.
Loosen screws to release wires.
5.
Loosen strain relief and pull-out cable.
6.
Move strain relief to new switch and insert wires.
7.
Connect wires on each side of normally open set of contacts.
8.
Re
place cover and bolt switch back onto frame so that it’s level with the tub frame.
9.
Power tub back on.
10.
Lower the tub an inch or so and then raise tub until it stops.
11.
Verify that tub rails are approximately level. If rails are off, then the height of the switch needs
to be adjusted to achieve level.
Door
Item
Part #
Description
Item
Part #
Description
1
200447
Solare Door Ass. Left Hinge
3
350577
Door Hinge Pin
2
401072
Gasket Extrusion; 0.5 x 0.5 x 68”
4
200446
Solare Door Ass. Right Hinge
