Solares
TM
Smart Spa Parts Manual
CD0039
26
Rev:1121
9.
Replace the cover ensuring screws are tightened down all the way.
10.
Plug in electrical box and verify proper operation.
Part #2,3,4, and 10
–
Fuses
1.
Raise tub to highest position if it is not already in the up position.
2.
Unplug power cable from wall outlet.
Warning! Failure to do so could result in electrocution!
3.
Loosen screws holding on electrical box cover until they are free of the box and remove the
cover.
4.
Flip up the top of the fuse holder containing the blown fuse and open the left side.
5.
Remove blown fuse and replace with new fuse.
6.
Close side and lower top of holder back into base. Top should sit securely in base.
7.
Replace the electrical box cover.
8.
Plug tub back in and verify correct operation.
Part #5,6,7,8, and 9
1.
Raise tub to highest position if it is not already in the up position.
2.
Unplug power cable from wall outlet.
Warning! Failure to do so could result in electrocution!
3.
Loosen screws holding on electrical box cover until they are free of the box and remove the
cover.
4.
Find the Relay to be serviced and pull back on the relay release lever to eject the relay.
5.
Line the pins of the new relay up with the contacts in the socket and slowly insert the relay cube
while returning the release lever to its upright position ensuring that no pins are bent.
6.
Replace the electrical box cover.
7.
Plug tub back in and verify correct operation.
Power Hub
–
Power Supply and Stepper Driver
Item
Part #
Description
Item
Part #
Description
1
330287
Power Supply; 110VAC to 24VDC
13.4A
4
350725
PH Mach Screw; M3-0.5 x 8mm
2
401086
Power Supply Bracket
5
350727
PH Mach Screw; 6-32 x 7/16
3
350339
#6 Flat Washer; SS
6
330339
Stepper Motor Driver; 2.5A
