Aastra 9480i Series Page 182 User Manual Download

Page: 182 / 250

176

Model 9480i IP Phone User Guide

Using CFWD via the IP Phone UI

Once CFWD is enabled on your phone, you can access and change the configuration using the

IP Phone UI or the Aastra Web UI. You can access the CFWD menus by pressing a

pre-configured Call Forward key, or by selecting

Options->Call Forward

from the IP Phone UI.

The following procedure assumes you have already configured a CFWD key AND assumes

there are three accounts configured on the phone.

CFWD in Account Mode

Use the

RIGHT

and

LEFT

arrow keys to scroll through each account.

In the above example, Screenname1, Screenname2, and Screenname3, are three accounts
configured on the phone. Screenname1 has “

CFWD All

” enabled, Screenname2 has

“

CFWD Busy

” enabled, and Screenname3 has CFWD disabled as indicated by no message

displayed.

Press the

Call Forward

key. The Call Forward Mode screen displays for the account you

selected. Use the

and

DOWN

arrow keys to scroll through each state type.

Notes:

If there is no CFWD key configured on the phone or it is removed, you can still

enable CFWD via the IP Phone UI at the path Options->Call Forward.

If there is only one account configured on the phone, then the mode setting is

ignored and the phone behaves as if the mode was set to “Phone”.

Using the Aastra Web UI, if you change the CFWD key mode to “

Phone

”, all

accounts synchronize to the current setting of Account 1.

Tues Jan1 10:00am

- Call Fwd

Screenname1

CFWD All

Tues Jan1 10:00am

- Call Fwd

Screenname2

Tues Jan1 10:00am

- Call Fwd

Screenname3

CFWD Busy

Summary of Contents for 9480i Series



























































































































































































































































Search results

Summary of Contents for 9480i Series

Reviews:

Related manuals for 9480i Series

Brands by name

Popular brands

Aastra 9480i Series, User Manual

Search results

Summary of Contents for 9480i Series

Reviews:

Related manuals for 9480i Series

Brands by name

Popular brands