Model 9480i IP Phone User Guide
145
4.
Press the
Conf
Key. A new line opens.
5.
Enter the phone number of Party 3.
6.
Wait for Party 3 to answer. When Party 3 answers, you can consult with them before adding
them to the Conference 1.
7.
Press the
Conf
Key again to add Party 3 to Conference 1. Party 1 (which is yourself), Party 2,
and Party 3 are all connected to Conference 1.
8.
Press an available
Line
Key (or answer an incoming call on an available line). If calling out,
call Party 4.
9.
Wait for Party 4 to answer. When Party 4 answers, you can consult with them before adding
them to the conference.
10.
Press the
Conf
Key to add Party 4 to Conference 1.
11.
Press the
Line
Key that has Conference 1.
12.
Press the
Conf
Key to join all parties (Parties 1 through 4) on Conference 1.
13.
To add more parties, repeat steps 8 through 12.
If any party in the conference hangs up (including the party that began the conference), all other
parties in the conference are still connected.
Setting Up Multiple Conferences (for Sylantro Server only)
1.
Start Conference 1 using the procedures in the previous section,
“Setting Up a Conference and
Adding Multiple Parties (for Sylantro and Broadsoft Servers)”
on
page 144
.
2.
When you are finished adding all required parties to Conference 1, press an available
Line
Key to start Conference 2. You are Party 1 on Conference 2. Call Party 2.
3.
When Party 2 answers, press the
Conf
Key.
4.
Press an available
Line
Key.
Note:
You can use
2
and
5
to scroll through and see the numbers and names (if
available) of the parties in the conference call. When a name is displayed, pressing
4
drops the displayed party from the call.
Note:
The 9480i is limited to 9 conferences (a single conference each on lines 1
through 9).
L2
John Smith
Dial
Conf
Xfer
>7788
