Model 9480i IP Phone User Guide
173
6.
Click
Basic Settings->Preferences->General
.
7.
In the “
Call Forward Key Mode
” field, select a call forward mode to use on the phone. Valid
values are: Account, Phone, Custom. Default is
Account
.
•
Account
- (default) The account mode allows you to configure CFWD on a per account basis.
Pressing a configured CFWD key applies to the account in focus.
•
Phone
- The Phone mode allows you to set the same CFWD configuration for all accounts
(
All
,
Busy
, and/or
No Answer
). When you configure the initial account, the phone applies the
configuration to all other accounts. (In the Aastra Web UI, only the account you configured is
enabled. All other accounts are grayed out but set to the same configuration.) Using the Aastra
Web UI, if you make changes to that initial account, the changes apply to all accounts on the
phone.
•
Custom
- The Custom mode allows you to configure CFWD for a specific account or all
accounts. You can configure a specific state (
All
,
Busy
, and/or
No Answer
) for each account
independently or all accounts.On the 9480i, you can set all accounts to
All On
,
All Off
, or
copy the configuration for the account in focus to all other accounts using a
CopytoAll
softkey.
8.
Click
Save Settings
.
The changes takes affect immediately without a reboot.
Note:
If there is only one account configured on the phone, then the mode setting is
ignored and the phone behaves as if the mode was set to “Phone”.