Aastra 9480i Series User Manual Download Page 188

Page: 188 / 250

182

Model 9480i IP Phone User Guide

17.

Press

DONE

in the CFWD Mode Screen to save all changes.

CFWD in Custom Mode

Use the

RIGHT

and

LEFT

arrow keys to scroll through each account.

In the above example, Screenname1, Screenname2, and Screenname3, are three accounts

configured on the phone. Screenname1 has “

CFWD All

” enabled, Screenname2 has “

CFWD

Busy

” enabled, and Screenname3 has CFWD disabled as indicated by no message displayed.

With the account in focus on the IP Phone UI, press the

Call Forward

key. The Call

Forward Account screen displays which lists all the accounts on the phone. Use the

and

DOWN

arrow keys to scroll through each account.

In the above example, Screenname1 has one or more CFWD states enabled as indicated by a

check mark (



), Screenname 2 has one or more CFWD states enabled but a specific state has no

call forward phone number configured as indicated by a

, and Screenname3 has one or more

CFWD states disabled as indicated by an

Note:

In “

Phone

” mode, the configuration applies to all the accounts on the phone.

Tues Jan1 10:00am

- Call Fwd

Screenname1

CFWD All

Tues Jan1 10:00am

- Call Fwd

Screenname2

Tues Jan1 10:00am

- Call Fwd

Screenname3

CFWD Busy

Indicates

CFWD Enabled

CFWD Disabled

Indicates
no CFWD phone
number configured

Call Forward
Account Screen

Call Forward

- Change
- All Off
- All On

Cancel -
Done -

CopytoAll -

1. Screenname1
2. Screenname2
3. Screenname3

Summary of Contents for 9480i Series



























































































































































































































































Search results

Summary of Contents for 9480i Series

Reviews:

Aastra 9480i Series, User Manual, Page: 188 / 250

Search results

Summary of Contents for 9480i Series

Reviews: