Aastra 9480i Series User Manual Download

Page: 190 / 250

184

Model 9480i IP Phone User Guide

You can also use the following keys if required:

•

All Off Key

- Disables all CFWD states for the selected account.

•

All On Key

- Enables all CFWD states for the selected account.

•

CopytoAll Key

- Copies the call forward phone number and state of the selected Call

Forward mode (All, Busy, No Answer) to every Call Forward mode of that account. For
example, if you have the cursor pointing at the “

All

” state and it is enabled and has a call

forward phone number configured, pressing the

CopytoAll

Key enables the

Busy

state

and the

NoAns

state and assigns the same phone number to both states.

•

Cancel Key

- Cancels any configuration you may have made without saving. To cancel

a configuration, you must press this

CANCEL

key before pressing the

DONE

key.

Press the

CHANGE

key for the mode you selected in step 4. This displays the Call Forward

State screen. In the following example, the CFWD All state is ON.

Press the

CHANGE

key in the CFWD State screen. With the cursor in the “

State

” field,

toggle the state ON and OFF by pressing the

CHANGE

key.

Note:

You can press the

AllAccts

key to copy the settings in the current Call

Forward Settings screen for a specific call forward mode, to every account on the
phone. Every account will have the same settings for that call forward mode.

Call Forward

Mode NoAns

- AllAccts

Cancel -
Done -

State: On
Number: 5551212
No. Rings: 1

- Change

Call Forward

Mode NoAns

- AllAccts

Cancel -
Done -

State: Off
Number: 5551212
No. Rings: 1

- Change

Change

Call Forward

Mode NoAns

- AllAccts

Cancel -
Done -

State: Off
Number: 5551212__
No. Rings: 1

- Backspace

Call Forward

Mode NoAns

- AllAccts

Cancel -
Done -

State: Off
Number: 5551212
No. Rings: 3

- Change

Change the
State

Change the
Number

Change the
No. Rings

Call Forward
State Screen

Summary of Contents for 9480i Series



























































































































































































































































Search results

Summary of Contents for 9480i Series

Reviews:

Related manuals for 9480i Series

Brands by name

Popular brands

Aastra 9480i Series, User Manual

Search results

Summary of Contents for 9480i Series

Reviews:

Related manuals for 9480i Series

Brands by name

Popular brands