Aastra 9480i Series User Manual Download

Page: 189 / 250

Model 9480i IP Phone User Guide

183

Select an account using the

and

DOWN

arrow keys.

You can also use the following keys if required:

•

All Off Key

- Disables CFWD for all accounts on the phone.

•

All On Key

- Enables CFWD for all accounts on the phone.

•

CopytoAll Key

- Copies all settings for the account you select, to all other accounts on the

Call Forward Account screen. For example, if you have the cursor pointing at
Screenname1, and you press the

CopytoAll

key, all of the CFWD settings for

Screenname1 are copied to Screenname2 and Screenname3.

•

Cancel Key

- Cancels any configuration you may have made without saving. To cancel a

configuration, you must press this

CANCEL

key before pressing the

DONE

key.

After selecting an account, press

CHANGE

The Call Forward Mode screen displays for the account you selected. Use the

and

DOWN

arrow keys to scroll through each state type.

In the above example,

CFWD All

is enabled as indicated by a check mark (



CFWD Busy

is enabled but no call forward phone number is configured as indicated by a

, and

CFWD No

Answer

is disabled, as indicated by an

Select a state for the selected account(s) using the

and

DOWN

arrow keys

You can enable/disable any or all of the following states for a specific account or for all
accounts (with individual configurations):

•

All

- Enables

CFWD All

for an account and forwards all incoming calls for that account, to

the specified number. The phone number can be different between accounts.

•

Busy

- Enables

CFWD Busy

for an account and forwards incoming calls to a specified

number if DND has been enabled for that account OR if that account is currently engaged in
another call. The phone number can be different between accounts.

No Answer

- Enables

CFWD NoAns

for an account and forwards incoming calls to a

specified number if the call has not been answered for a specified number of rings. The phone
number can be different between accounts.

Note:

CFWD All

AND

CFWD Busy

AND

CFWD NoAns

are all enabled (and/

or if the account has DND enabled), the

CFWD All

settings take precedence over

CFWD Busy

and

CFWD NoAns

Call Forward Mode

- Change
- All Off
- All On

Cancel -
Done -

CopytoAll -

1. All
2. Busy
3. No Answer

Indicates

CFWD Enabled

CFWD Disabled

Indicates
no CFWD phone
number configured

Call Forward
Mode Screen

Summary of Contents for 9480i Series



























































































































































































































































Search results

Summary of Contents for 9480i Series

Reviews:

Related manuals for 9480i Series

Brands by name

Popular brands

Aastra 9480i Series, User Manual

Search results

Summary of Contents for 9480i Series

Reviews:

Related manuals for 9480i Series

Brands by name

Popular brands