Aastra 9480i Series Page 183 User Manual Download

Page: 183 / 250

Model 9480i IP Phone User Guide

177

In the above example,

CFWD

All

is enabled as indicated by a check mark (



CFWD Busy

enabled but no call forward phone number is configured as indicated by a

, and

CFWD NoAns

disabled as indicated by an

Select a state for the account(s) in focus using the

and

DOWN

arrow keys.

You can enable/disable any or all of the following states for an account:

•

All

- Enables

CFWD All

for an account and forwards all incoming calls for that account, to

the specified number.

•

Busy

- Enables

CFWD Busy

for an account and forwards incoming calls to a specified

number if DND has been enabled for that account OR if the account is currently engaged in
another call.

•

No Answer

- Enables

CFWD NoAns

for an account and forwards incoming calls to a

specified number if the call has not been answered for the specified number of rings.

You can also use the following keys if required:

•

All Off

- Disables all CFWD states for the current account in focus.

•

All On

- Enables all CFWD states for the current account in focus.

•

CopytoAll Key

- Copies the call forward phone number and state of the Call Forward mode

(All, Busy, No Answer) in focus to every Call Forward mode of that account. For example, if
you have the cursor pointing at the “

All

” state and it is enabled and has a call forward phone

number configured, pressing the

CopytoAll

Key enables the

Busy

state and the

NoAns

state

and assigns the same phone number to both states.

•

Cancel Key

- Cancels any configuration you may have made without saving. To cancel a

configuration, you must press this

CANCEL

key before pressing the

DONE

key.

Note:

CFWD All

AND

CFWD Busy

AND

CFWD NoAns

are all enabled (and/

or if the account has DND enabled), the

CFWD All

settings take precedence over

CFWD Busy

and

CFWD NoAns

Call Forward Mode

- Change
- All Off
- All On

Cancel -
Done -

CopytoAll -

1. All
2. Busy
3. No Answer

Indicates

CFWD Enabled

CFWD Disabled

Indicates
no CFWD phone
number configured

Call Forward
Mode Screen

Summary of Contents for 9480i Series



























































































































































































































































Search results

Summary of Contents for 9480i Series

Reviews:

Related manuals for 9480i Series

Brands by name

Popular brands

Aastra 9480i Series, User Manual

Search results

Summary of Contents for 9480i Series

Reviews:

Related manuals for 9480i Series

Brands by name

Popular brands