Operational Features
41-001160-01, Rev 00, Release 2.3
5-53
Configuring Operational Features
Configuring the SIP Local Dial Plan, Dial Plan Terminator, and Digit
Timeout
Use the following procedures to configure the SIP Local Dial Plan using the
configuration files or the Aastra Web UI.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
“SIP Local Dial
Plan Settings”
on
page A-62.
Aastra Web UI
1
Click on
Basic Settings->Preferences
.
2
In the "
Local Dial Plan
" field, enter a valid local dial plan (up to 127 alphanumeric characters) for the
IP phone. Default is X+#|XX+*. Enter prepended digits or a “;”to present a secondary dial tone if
required.
3
Enable the "
Send Dial Plan Terminator
" field by checking the check box. (Disable this field by
unchecking the box). Default is disabled.
Summary of Contents for 5i Series
