background image

Network Settings

41-001160-01, Rev 00, Releaes 2.3

4-5

Configuring Network and Session Initiation Protocol (SIP) Features

FTP Path

HTTP Server

HTTP Path

HTTP Port

HTTPS Server

HTTPS Path

HTTPS Port

The network administrator chooses which of these parameters (if any) are 
supplied to the IP phone by the DHCP server. The administrator must configure 
the phone manually to provide any required network parameters not supplied by 
the DHCP server.

DHCP Options 60, 66, and 43 Server Configurations

Option 66

The IP Phones support download protocols according to RFC2131 and RFC1541 
(TFTP, FTP, HTTP,. HTTPS) to support DHCP option 66. Option 66 is part of the 
DHCP Offer message that the DHCP server generates to tell the phone which 
configuration server it should use to download new firmware and configuration 
files.

For DHCP to automatically populate the IP address or domain name for the 
servers, your DHCP server must support Option 66. Option 66 is responsible for 
forwarding the server’s IP address or domain name to the phone automatically. If 
your DHCP server does not support Option 66, you must manually enter the IP 
address or domain name for your applicable configuration server into your IP 
phone configuration.

Options 60 and 43

The Aastra phones also support Option 60 and Option 43 as per RFC 2132.

Option 60 (Vendor Class Identifier) provides the DHCP server with a unique 
identifier for each phone model.  This enables a system administrator to send the 
phone a customized Server Configuration in option 43.

Summary of Contents for 5i Series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews: