Aastra 5i Series, Administrator'S Manual

Page: 930 / 1134

Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
A-194 41-001160-01, Rev 00, Release 2.3
IP Phone Administrator Guide
Programmable Key Settings for 9143i, 53i, and 55i
• The value of " N " for the following parameters is dependent on the number of
programmable keys available on the phone models. See the table on page 184
for the applicable values
.
Parameter –
prgkeyN type
Type
(in Web UI)
Aastra Web UI Operation->Programmable Keys
Configuration Files aastra.cfg, <mac>.cfg
Description The type of programmable key to configure. Valid types are:
• none - Indicates no setting for programmable key.
• line - Indicates programmable key is configured for line use.
• speeddial - Indicates programmable key is configured for speeddial
use. You can configure a programmable key to speeddial a specific
number by pressing that key. Optionally, you can also configure a
speeddial key to dial prefix numbers. With this option, the prefix
numbers automatically dial when you press the programmable key,
and the phone waits for you to enter the remaining numbers to dial.
Note : When there is an active call, the speeddial keys send DTMF
digits through the active voice path. To dial out, you have to first put
the active call on hold and then press the speeddial key.
• dnd - Indicates programmable key is configured for do not disturb
on the phone. This option is " Do Not Disturb " in the Aastra Web
UI).
• blf - Indicates programmable key is configured for Busy Lamp Field
(BLF) use. User can dial out on a BLF configured key.
• list - Indicates programmable key is configured for BLF list use.
User can dial out on a BLF List configured key. You can also use the
“BLF List URI” parameter to specify a URI for the phone to access
for the BLF List.
• acd - (for Sylantro Servers only) Indicates the programmable key is
configured for auto call distribution (called “ Auto Call Distribution ”
in the Aastra Web UI). The ACD feature allows the Sylantro server
to distribute calls from a queue to registered IP phone users
(agents).
• dcp - (for Sylantro Servers only) Indicates the programmable key is
configured for either directed call pickup or group call pickup (called
“ Directed Call Pickup ” in the Aastra Web UI). The Directed Call
Pickup/Group Call Pickup feature allows you to intercept or pickup a
call on a monitored extension or a group of monitored extensions.
• xml - Indicates programmable key is configured to accept an XML
application for accessing customized XML services. You can also
specify an XML softkey URL for this option.
• webapps - Indicates the key is hardcoded to access an Aastra
XML-based application (xml.myaastra.com). This option is also
accessible from the Services menu on the 51i, 53i, and 9143i.