Aastra 5i Series, Administrator'S Manual

Page: 921 / 1134

Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
41-001160-01, Rev 00, Release 2.3 A-185
Softkey Settings for 9480i, 9480i CT, 55i, 57i, 57i CT
The value of " N " for the following parameters is dependent on the number of
softkeys available on the 9480i, 9480i CT, 55i, 57i, and 57i CT models. See the
table above for applicable values.
Parameter –
softkeyN type
Type
(in Web UI)
Aastra Web UI Operation->Softkeys and XML
Configuration Files aastra.cfg, <mac>.cfg
Description The type of softkey to configure. Valid types are:
• none - Indicates softkey key is disabled.
• line - Indicates softkey is configured for line use.
• speeddial - Indicates softkey is configured for speeddial use.
Speeddial is applicable to the 536M and 560M also. You can
configure a softkey to speeddial a specific number by pressing that
softkey. Optionally, you can also configure a speeddial key to dial
prefix numbers. With this option, the prefix numbers automatically dial
when you press the softkey, and the phone waits for you to enter the
remaining numbers to dial out.
Note : When there is an active call, the speeddial keys send DTMF
digits through the active voice path. To dial out, you have to first put
the active call on hold and then press the speeddial key.
• dnd - Indicates softkey is configured for do not disturb on the phone.
This option is " Do Not Disturb " in the Aastra Web UI). You must also
set the DND key mode. See
• blf - Indicates softkey is configured for Busy Lamp Field (BLF) use.
User can dial out on a BLF configured key. Maximum of 50 BLFs are
applicable to the 536M and 560M also.
• list - Indicates softkey is configured for BLF list use. (This option is
BLF/List in the Aastra Web UI). User can dial out on a BLF List
configured key. You can also use the “BLF List URI” parameter to
specify a URI for the phone to access for the BLF List.
• acd - (for Sylantro Servers only) Indicates the programmable key is
configured for auto call distribution (called “ Auto call distribution ” in
the Aastra Web UI). The ACD feature allows the Sylantro server to
distribute calls from a queue to registered IP phone users (agents).
• dcp - (for Sylantro Servers only) Indicates the programmable key is
configured for either directed call pickup or group call pickup (called
“ Directed Call Pickup ” in the Aastra Web UI). The Directed Call
Pickup/Group Call Pickup feature allows you to intercept or pickup a
call on a monitored extension or a group of monitored extensions.
• xml - Indicates the softkey is configured to accept an XML application
for accessing customized XML services. You can also specify an XML
softkey URL for this option.