Aastra 5i Series, Administrator'S Manual

Page: 945 / 1134

Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
41-001160-01, Rev 00, Release 2.3 A-209
Format • sprecode - Indicates the softkey is configured to automatically
activate specific services offered by the server. For example, if the
sprecode value of *82 is configured, then by pressing the softkey, *82
automatically activates a service provided by the server.
• park - Indicates the softkey is configured to park incoming calls when
pressed.
• pickup - Indicates the softkey is configured to pick up parked calls
when pressed.
• lcr - Indicates the softkey is configured for “last call return” when
pressed.
• call forward - Indicates the softkey is configured for accessing the
Call Forward features on the phone. A Call Forwarding Mode must be
enabled to use this softkey. “Account” mode is the default.
• blf/xfer - Indicates the softkey is configured to transfer calls AND
configured for BLF on a single key.
• speeddial/xfer - Indicates the softkey is configured to transfer calls
AND configured for speeddialing to a specific number.
• callers - Indicates the softkey is set for accessing the Callers List.
• directory - Indicates the softkey is set for accessing the Directory
List.
• icom - Indicates the softkey is set to be used as the Intercom key.
• services - (not available on the 53i) Indicates the softkey is set to be
used as the Services key.
• phonelock - Indicates the softkey is set to be used to lock/unlock the
phone.
• paging - Indicates the softkey is set for Group Paging on the phone.
Pressing this key automatically sends a Real Time Transport Protocol
(RTP) stream to pre-configured multicast address(es) without
involving SIP signaling.
• empty - Indicates the softkey is configured to force a blank entry on
the IP phone display for a specific softkey. The soft keys are added in
order (from softkey1 to softkey20) after any hard-coded keys have
been added. If a particular soft key is not defined, it is ignored.
Default Value none