Aastra 5i Series, Administrator'S Manual

Page: 402 / 1134

Operational Features
5-110 41-001160-01, Rev 00, Release 2.3
IP Phone Administrator Guide
Use the following procedure to enable/disable the Redial , Xfer , and Conf keys.
Mapping Redial and Conf Keys as Speeddials
You can map the Redial and Conference keys on the IP phone to use as speeddial
keys. When the Redial or Conference key is pressed, the number configured for
the key automatically speed dials. If no number is configured, the Redial and
Conference keys return to their original functionality.
You can configure this feature using the configuration files or the Aastra Web UI.
Use the following procedures to set the Redial and Conf keys as speeddial keys.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Mapping Key
Settings” on page A-181.
Note: If you configure the Redial and Conference keys for speeddialing
on the 57i CT Base Station, the Redial and Conference keys on the
57i CT handset retain their original functionality. The Redial and
Conference keys on the handset are not configured for speeddial.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Mapping Key
Settings” on page A-181.