Aastra 5i Series Administrator'S Manual Download

Page: 553 / 1134

Operational Features

41-001160-01, Rev 00, Release 2.3

5-261

Configuring Operational Features

Select a state for the account(s) in focus using the

and

DOWN

arrow keys.

You can enable/disable any or all of the following states for an account:

•

All

- Enables

CFWD All

for an account and forwards all incoming calls for that account, to the

specified number.

•

Busy

- Enables

CFWD Busy

for an account and forwards incoming calls to a specified number if

DND has been enabled for that account OR if the account is currently engaged in another call.

•

No Answer

- Enables

CFWD NoAns

for an account and forwards incoming calls to a specified

number if the call has not been answered for the specified number of rings.

Note:

CFWD All

AND

CFWD Busy

AND

CFWD NoAns

are all enabled (and/or if the account has

DND enabled), the

CFWD All

settings take precedence over

CFWD Busy

and

CFWD NoAns.

You can also use the following keys if required:

All Off Key

- Disables all CFWD states for the current account in focus.

All On Key

- Enables all CFWD states for the current account in focus.

CopytoAll

Key

- Copies the call forward phone number and state of the Call Forward mode (All,

Busy, No Answer) in focus to every Call Forward mode of that account. For example, if you have the
cursor pointing at the “

All

” state and it is enabled and has a call forward phone number configured,

pressing the

CopytoAll

Key enables the

Busy

state and the

NoAns

state and assigns the same

phone number to both states.

Cancel Key

- Cancels any configuration you may have made without saving. To cancel a

configuration, you must press this

CANCEL

key before pressing the

DONE

key.

Aastra IP Phone UI

Step Action

Summary of Contents for 5i Series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5i Series

Reviews:

Related manuals for 5i Series

Brands by name

Popular brands

Aastra 5i Series, Administrator'S Manual

Search results

Summary of Contents for 5i Series

Reviews:

Related manuals for 5i Series

Brands by name

Popular brands