A&D AD-4405A, Instruction Manual

Page: 43 / 76

AD-4405A Weighing Indicator
Page 41
10.1.2. Setting the Upper/Lower Limit Values
Step 1 By pressing the
SETPOINT
key, the selected code memory number is displayed
and the first comparison class term (ex. Hi, TG etc.) is blinking.
Step 2 Select the comparison class using the following keys:
SETPOINT
key ........The key to select a comparison class.
ESC
key..................The key to return to the previous stage (weighing mode or
code memory number selection mode).
ENTER
key .............The key to proceed to step 3.
Step 3 Set the setpoint values using the following keys:
0
-
9
key .................The key to enter a value.
ESC
key..................The key to return to step 2 without changing the set value.
ENTER
key .............The key to store the value and return to step 2.
Setting Order and Display for Weight Check Mode
f22 MODE Display 1 2 3 4 5
1 Upper Setpoint Upper Lower
Lower 1 Class Hi Lo
Comparator HI LO
2 Upper Setpoint Target Upper Lower
Lower 2 Class TG Hi Lo
Comparator OK HI LO
3 Upper Setpoint Target Upper Lower
Lower 3 Class TG Hi Lo
Comparator OK HI LO
Unit % %
4 5-stage Setpoint HiHi Hi Lo LoLo
1 Class HH Hi Lo LL
Comparator HI HI LO LO
Triangle 2 3
5 5-stage Setpoint Target HiHi Hi Lo LoLo
2 Class TG HH Hi Lo LL
Comparator OK HI HI LO LO
Triangle 2 3
6 5-stage Setpoint Target HiHi Hi Lo LoLo
3 Class TG HH Hi Lo LL
Comparator OK HI HI LO LO
Unit % % % %
Triangle 2 3
10.1. Weight Check Mode
Test Equipment Depot - 800.517.8431 - 5 Commonwealth Ave, Woburn, MA 01801
TestEquipmentDepot.com