AD-4405A Weighing Indicator
Page 9
ZERO key
The key to zero the current display.
CLEAR key
The key to clear the setting value.
TARE key
The key to perform tare.
ESC
key
The key to proceed to the next step without changing the
parameter set.
NET/GROSS key The key to select net or gross weight in the display.
+/- key
The key to or – of a value.
ENTER key
The key to confirm settings and store the values.
PRINT key
The key to print/output data.
ON/OFF key
Turns the display on and off (OFF: hold for 3 seconds).
10 Printer cover
Printer paper will be stored inside when the printer is installed.
Printer
Dot matrix printer (optional).
4.2. Rear Panel Description
No. Name
Description
11 Power cord
Connect to the AC power source.
12 Grounding
terminal Connect to the Earth (M4 size screw).
13 Load cell connector Connect a load cell using the accessory load cell plug.
14 CAL key cover
The CAL key is located behind the sealing panel [15].
15 Sealing panel
For type approval, available with the sealing wire posts.
16 RS232C connector
Exchange this when installing other data output (Options).
4.3. Other Displays and Symbols
Standby display.
Zero error when turning the display on. If the
ESC
key is
pressed, the current weighing value may be displayed.
Overload display. Remove any load from the load cell
immediately. It may cause damage to the load cell.
An example of an error display.
4. Description of Panels and Symbols
11
12
13
14
15
16
