Chapter 6. 3DM 2 (3ware Disk Manager) Introduction
76
3ware Serial ATA RAID Controller User Guide
Setting Up 3DM Preferences
The 3DM 2 Settings page lets you define preference settings that affect the
overall operation of 3DM. Most of these settings are specified initially during
installation of 3DM.
On the 3DM 2 Settings page you can perform the following tasks:
•
Setting and Changing 3DM Passwords
•
Managing E-mail Event Notification
•
Enabling and Disabling Remote Access
•
Setting the Incoming Port #
•
Setting the Frequency of Page Refreshes
Maintenance page
Lets you configure new units and make changes to
existing units.
To view this page, choose
Management > Maintenance
from the menu bar.
Alarms page
Shows a list of alarms, including the specific alarm
message, and the exact date and time it occurred.
To view this page, choose
Monitor > Alarms
on the menu
bar.
Battery Backup page
Shows the status of a Battery Backup Unit (BBU), if one is
installed, and allows you to test the battery.
To view this page, choose
Monitor > Battery Backup
on
the menu bar.
Enclosure Summary
page
Lists the enclosures attached to your 3ware controller.
To view this page, choose
Monitor > Enclosure
Support
on the menu bar.
Enclosure Details
page
Shows details about a particular enclosure, including
status information. You can also use this page to blink the
LED for a particular drive.
To view this page, click the ID number of the Enclosure on
the Enclosure Summary page.
3DM 2 Settings page
Lets you set preferences, including email notification for
alarms, passwords, page refresh frequency, whether
remote access is permitted, and the incoming port which
3DM will use for listening.
To view this page, click
3DM 2 Settings
on the menu bar.
Table 8: List of 3DM Pages
3DM Page
Description
