Chapter 2. Getting Started with Your 3ware RAID Controller
18
3ware Serial ATA RAID Controller User Guide
•
“Configuring Your Controller” on page 80
•
“Setting Unit Policies” on page 106
•
“Setting Background Task Rate” on page 155
Initial Settings for Policies and Background Tasks
The table below lists the default settings for policies and background tasks.
These settings are used if you do not explicitly change the policy settings.
Table 6: Default Settings for Policies and Background Tasks
Policy
Default Value
Where to Change
Controller-Level Settings
(For details, see “Configuring Your Controller” on page 80
Auto-Rebuild
Enabled
3BM, 3DM, CLI
Auto-Carving
Disabled
3BM, 3DM, CLI
Auto-Detect
Enabled
CLI
Carve Size or Factor
2048 GB
3BM, 3DM, CLI
Drives Per Spinup
1
3BM, CLI
Delay Between Spinup
6 seconds
3BM, CLI
Export Unconfigured (JBOD)
Disks
Disabled
3BM, CLI
Staggered Method
ATA-6
3BM
Staggered Spinup
Enabled
3BM
Unit-Level Settings
(For details, see “Setting Unit Policies” on page 106)
Auto Verify
Disabled
3DM, CLI
Continue on Source Error
During Rebuild
Disabled
3BM, 3DM, CLI
Boot Volume Size
Blank
3BM
Queuing (NCQ)
Enabled
3BM, 3DM, CLI
StorSave Profile
Protection
3BM, 3DM, CLI
Write Cache
Enabled
3BM, 3DM, CLI
Background Task Settings
(For details, see “Scheduling Background Tasks” on page 156 and “Setting
Background Task Rate” on page 155)
