Pannoramic SCAN II 2.0 User’s Guide
5 Scanning modes and settings
5.3.2 General functions at the magazine menu
Rack view mode selector
Switch view by clicking this button. Click
to add a virtual magazine to the planner, and
to
remove a magazine from the planner.
Rack menu
includes the following global settings applicable to all magazines:
•
Add current profile for all slides
•
Open profile to all slides
•
Detach current profile from all slides
•
Detach profiles from slides
5.3.3 General functions at the slide menu
•
Mark empty slide positions – Define range in the
Empty slide range
boxes to set multiple
slide positions as empty. For single slides, enter / set slide position with the arrows in the
Empty single slide
box or right-click on a slide and select
Mark as empty
.
•
Click
Reset empty definitions
to cancel slide selections as empty, or right-click the slide
selected as empty and click
Reset
.
Figure 71 – General functions at the slide menu
June 4, 2018 - Rev. 2
3DHISTECH Ltd.
97(142)
For research and education uses only, not for use in diagnostic procedures.