Pannoramic SCAN II 2.0 User’s Guide
5 Scanning modes and settings
5 Scanning modes and settings
After microscope initialization, if FL HW option is provided, you can select from the following two
modes:
•
Brightfield scanning mode
(see section
5.1 Brightfield Scanning Mode
for more information)
•
Fluorescence scanning mode
(see section
5.2 Fluorescence Scanning Mode
for more
information)
•
Option modes
◦
Off
◦
Services
(see section
5.6 Services and Settings
for more information)
◦
Settings
(see section
5.6 Services and Settings
for more information)
In accordance with the selected mode, the
Profile Settings Panel
and the
Microscope Control Panel
views are modified.
5.1 Brightfield Scanning Mode
Microscope View consist of three different sections:
•
Main functions
: Located at below the window header, these functions are identical in both
modes.
•
Profile Settings panel
: Profile settings containing parameters used for scanning.
•
Microscope Control Panel
: Live microscope movement functions
Figure 17 – Main window of Brightfield Microscope mode
June 4, 2018 - Rev. 2
3DHISTECH Ltd.
46(142)
For research and education uses only, not for use in diagnostic procedures.