Pannoramic SCAN II 2.0 User’s Guide
5 Scanning modes and settings
5.3.5 Table view mode
By clicking
each slide will be displayed in a separate row.
Click
to assign profile to a slide, and
to detach a profile from a slide. A slide can have more
than one profile assigned to it, and these profiles can either be BF or FL if the scanner is capable to
operate in these two scanning modes.
Figure 75 – Table view mode
In Table view the following information are displayed in the profile strip based on the loaded profile:
•
Profile name
•
Illumination
•
Objective type
•
Filters
•
Progress
•
Properties: The location of the virtual slide with the selected profile can be defined
◦
Scan result
◦
Scan duration
◦
Scanned FOV'S
◦
Total FOVs
June 4, 2018 - Rev. 2
3DHISTECH Ltd.
101(142)
For research and education uses only, not for use in diagnostic procedures.