3DHISTECH Ltd. Pannoramic SCAN II 2.0, User Manual, Page: 108 / 142

Pannoramic SCAN II 2.0 User’s Guide 5 Scanning modes and settings
◦
Check Available for scanning
◦
Set Lumencor LED light source , set Excitation and Emission wavelength / bandwidth
values for the selected filter.
◦
Set Pseudo-color
◦
Select channels used for grayscale conversion
◦
Select Enable Lumencor hardware trigger
Click Save to save settings.
•
– Z-difference
This function is available only for fluorescence settings; it enables you to set the basic focus
differences between the filters. This facilitates more precise focusing during scanning.
•
– Barcode settings
By predefining barcode type, foreground color ( black or white – the color of the barcode),
and other settings, you enable the
Read Barcode option when using the control software.
To display an image of the barcode area, click . You can redefine the barcode
reading area by dragging the edges of the blue square.
To check whether the barcode reading settings are correct, display the barcode digits in the
Barcode field by clicking . If the label area is not correctly illuminated, adjust
Barcode LED intensity value.
Click to check that barcode settings are correctly set.
June 4, 2018 - Rev. 2 3DHISTECH Ltd. 108(142)
For research and education uses only, not for use in diagnostic procedures.