Pannoramic SCAN II 2.0 User’s Guide
6 Troubleshooting and Maintenance
6.3.4 Removing the magazine from the transporting system
Figure 83 – Removing a magazine
1. Remove the protective covers (see section
5.3.1 Removing the protective covers
).
Warning!
Crush hazard! Remember to stop the running digitization
process,
terminate the software session and turn off the power supply before
removing a jammed magazine.
Caution!
Check that the magazine is not tilted, so that it rests on both of the
horizontal guide rails.
June 4, 2018 - Rev. 2
3DHISTECH Ltd.
129(142)
For research and education uses only, not for use in diagnostic procedures.