3DHISTECH Ltd. Pannoramic SCAN II 2.0 User Manual Download Page 85

Page: 85 / 142

Pannoramic SCAN II 2.0 User’s Guide

5 Scanning modes and settings

Marker

Scan area inside the marker

is selected in the Preview panel, the

preview camera detects the marker pen. The inside areas appear in red
color and will be digitized.

Areas scanned in

This color is only displayed during scanning.

Hide all layers

Separate scanning

Discrete sample areas will be scanned separately as individual slides. If

there are two samples on a slide, two separate virtual slides will be
created.

Show pre-scans pseudo-colorized

Click the

button to display barcode label area. To rotate the label area by 180°, click

Figure 52 – Barcode label area window

June 4, 2018 - Rev. 2

3DHISTECH Ltd.

85(142)

For research and education uses only, not for use in diagnostic procedures.

Summary of Contents for Pannoramic SCAN II 2.0















































































































































Search results

Summary of Contents for Pannoramic SCAN II 2.0

Reviews:

3DHISTECH Ltd. Pannoramic SCAN II 2.0, User Manual, Page: 85 / 142

Search results

Summary of Contents for Pannoramic SCAN II 2.0

Reviews: