52
m a n u a l o p e r a t i o n s
Elevator
The manual operations
Elevator
allows you to operate the elevator manually. “
and the following textual explanations, show the command’s functions. Be careful when entering
values; if there is a safety limit, observe it. The software tells you to home the recoater, prior to
moving the elevator.
Position:
Shows the current position of the elevator relative to the home position
The following buttons perform these actions:
Home:
Moves the elevator to the home switch and redefines the home position (relative zero
position of the elevator)
Start:
Moves the elevator to its Start position, as defined by Set Start.
Note: will not work if elevator has not been homed
Offload:
Moves the elevator to its Offload position, as defined by the position.
Note: will not work if elevator has not been homed
To
Move
the Elevator, specify
Distance
and
Velocity
.
70696 Revision 1C 27-Aug-08
