3D Systems Viper Pro SLA User Manual Download

Page: 112 / 121

112

Post-process

The process of cleaning, curing, and finishing stereolithographic parts.

Process chamber

The chamber in which the RDM, elevator, and beam profilers are located.

Recoating

The process of adding a layer of liquid resin with a user-specified thickness on top of the previously
cured layer.

Recoat style

A style file that defines parameters associated with recoating during the stereolithographic process.

Recoater assembly

The assembly of an SLA system that either applies resin to, or removes excess resin from, the part
as the recoater blade moves across the RDM.

Recoater blade

The part of the recoater assembly that contacts the resin.

Resin

Another name for the photopolymer chemical used in stereolithography.

70696 Revision 1C 27-Aug-08

Summary of Contents for Viper Pro SLA


























































































































Search results

Summary of Contents for Viper Pro SLA

Reviews:

Related manuals for Viper Pro SLA

Brands by name

Popular brands

3D Systems Viper Pro SLA, User Manual

Search results

Summary of Contents for Viper Pro SLA

Reviews:

Related manuals for Viper Pro SLA

Brands by name

Popular brands