3D Systems, Inc.
4
AT A GLANCE
PROJET 2500 PRINTER SYSTEM
A
B
C
E
D
Print Engine :
The Print Engine contains major systems such as the Printhead, Planarizer, UV Lamp Assembly, Wave Amp
and the IGUS Track .
Print Zone:
Print Zone is the area where the print platform can be found . All print jobs are built on the print platform . For
more information see
Printing Area
next page .
User Interface (UI):
This is the built-in touchscreen which allows the user to interface with the printer . The touchscreen
runs the Mycroft software that allows user to check printing status, material levels, as well as power printer on and off . For
more information on what user can access through the UI go to the
User Interface
section of this manual .
Electrical Cabinet (located in back of printer):
The electrical cabinet contains all the electrical equipment for the ProJet
2500 . The cabinet can be accessed through the back of the printer .
Material Drawer Module (MDM):
The MDM drawer is a push/push type mechanism . To open the drawer push in, drawer
should pop open allowing you to pull it open the rest of the way . The MDM contains the part and support materials and the
waste bag .
A
B
C
D
E
11
Summary of Contents for ProJet 2500
Page 1: ...User Guide Original Instructions ProJet 2500 3D Printer System ...
Page 5: ......
Page 50: ...45 ...
