3D Systems ProJet 2500, User Manual

Page: 31 / 53

3D Systems, Inc.
Inspect and Clean Planarizer Housing
Material can get trapped and built-up in the housing of the planarizer . It is important to periodically inspect and clean these areas .
Follow these steps to inspect and clean the planarizer housing .
To inspect and clean planarizer housing:
1 . Move print engine to the Ready state . This will place the
printer over build plate area and will tilt the blade .
2 . Lift the cover to expose the planarizer blade .
3 . Visually inspect the planarizer . It may be necessary to clean
excess material from the holes in the housing . This can be
done using a cotton swab and isopropyl alcohol .
4 . Using a cotton swab, gently wipe out excess material from
holes . For stubborn areas, use a bit of isopropyl alcohol on
the cotton swab before wiping .
5 . Continue this process for everywhere you see buildup .
6 . Rotate planarizer so the two planarizer ducts (A) can be
easily accessed as shown .
A
26