3D Systems, Inc.
4 . Place the entire basket in a 70°C (158
°
F) oven for 30
minutes or until the wax support material has melted off .
NOTE: Ensure you set the basket on top of a drip tray
to allow support material to drip off into the tray .
5 . Remove parts from oven and wipe off any remaining support
material with a lint free paper towel .
6 . Place parts in a clean warm mineral bath (approx . 65
°
C
(149
°
F) ) for 30 minutes .
7 . After 30 minutes wipe parts dry and they are ready to use .
22
Summary of Contents for ProJet 2500
Page 1: ...User Guide Original Instructions ProJet 2500 3D Printer System ...
Page 5: ......
Page 50: ...45 ...