
3.
Damage caused by: accidents, fires, liquids, chemical products, other substances,
floods, vibrations, excessive heat, inadequate ventilation, voltage outage,
incorrect or excessive voltage, radiation, electrostatic discharge including
lightning and other external forces or impacts.
4.
Deterioration caused by improper transportation and handling like using
different packaging from the one provided, including the element’s protection
(Expanded polystyrene).
5.
Repairs or attempts of repairs done by third parties not by 3D Limitless.
6.
Modifications done to the product to adapt to rules and safety regulations of
particular countries, outside of what the design or manufacture was produced
for, are not covered.
7.
Warranty covers the product hardware components, not software or firmware
other than that provided by 3D Limitless.
Limitations and Disclaimers
This warranty is valid and current in the country where the product was bought and
restricted to the countries in the European Economic Union (EEU).
This warranty is the only and exclusive guaranty before 3D Limitless and the unique and
exclusive responsibility of 3D Limitless to the defects of its products. Therefore this
warranty will substitute any other issued by 3D Limitless oral, written or legal (not
mandatory).
With the exception of the previously mentioned cases, 3D Limitless will not give other
warranties (explicit, implicit, statutory or others) related to the product, the software
quality or its annexes, operation, accuracy, reliability or adaptability of the logic
equipment or any other. If this exception is not tendered or contemplated by the
current laws, 3D Limitless will limit or exclude the warranty only to the extent of these
laws. Any warranty that cannot be completely excluded shall be limited to the duration
of this. This warranty will not exclude or limit any legal rights (mandatory) under the
applicable national law or any of its rights against the vendor.
3D Limitless is not responsible for: damages or loss of product, services, this warranty or
others, including economic loss or invaluable damages; benefits, income or information
losses; use of this product or associated ones or loss of it or indirect, accidental or
critical damages.
3DLimitless will not be responsible for any wrong installation or improper use of this
product as explained in this manual.
It will not be our responsibility if the maintenance of the product is not done as
recommended in the manual.
Summary of Contents for ILC
