3Com NBX 100, Manual

Page: 23 / 76

NBX Business Telephone Guide 23
Features Not
Assigned to a
Dedicated Button
The administrator can assign additional features to available Access
buttons on all telephones or certain groups of telephones on the system.
In addition, some of these Access button may be available to you for
assigning One-touch Speed Dials.
The Figure 3 shows features as they are assigned to Access buttons from
the factory. The One-touch Speed Dials screen in NetSet shows your
telephone’s current button mappings. See,
“Assigning One-touch Speed
Dials” on page 54 .
Figure 3 Access Buttons
Using Feature Codes You can access any features that have not been assigned to your
telephone while the handset is off-hook by pressing the Feature Code
button (See
Figure 3 on page 23. ) and then entering the relevant feature
code. The following are codes for features that you may find useful.
This button comes pre-assigned
as
Feature Code .
This button comes pre-assigned
as
Direct Mail Transfer .
The bottom two or three buttons
are usually assigned for shared
system access and are used to
access internal (intercom) lines.
These access buttons can have
direct lines, speed dials,
message waiting indicators or
other features assigned to
them.
This button comes
pre-assigned as
Release .
This button comes
pre-assigned as
Call Park .
This button comes
pre-assigned as
Flash .
available
Table 5 Feature Codes
Feature Code Then...
Account Codes 888 Enter the account code and press #
Call Park 444 Enter a call park extension