3Com Courier, Reference

Page: 166 / 204

B-10 A
PPENDIX
B: A
LPHABETIC
C
OMMAND
S
UMMARY
n=29 44000 bps
n=30 45333 bps
n=31 46666 bps
n=32 48000 bps
n=33 49333 bps
n=34 50666 bps
n=35 52000 bps
n=36 53333 bps
n=37 54666 bps
n=38 56000 bps
n=39 57333 bps
&Rn Received data (RTS) hardware flow control.
&R0 Delay Clear to Send (CTS) response after Request
to Send (RTS).
&R1 Ignore RTS. This setting is required if your
computer or terminal or software does not
support RTS.
&R2
Enable hardware flow control of received data.
The modem sends data to the computer only
upon receipt of the RTS signal.
&Sn Send the computer a Data Set Ready (DSR) signal via the
EIA-232 interface.
&S0
DSR is always ON (override).
&S1 In Originate mode: Send DSR after dialing, on
detection of the remote device’s answer tone. In
Answer mode: Send DSR after sending an answer
tone.
&S2 When Carrier is lost, send a pulsed DSR signal
with Clear to Send (CTS) following Carrier Detect
(CD). This option is for specialised equipment such
as automatic callback units.
&S3 Same as &S2, but without the CTS signal.
&S4 Send the computer DSR at the same time as CD.
&S5 Send DSR normally, and follow CTS with CD.
&Tn Test the modem.
&T0 End testing.
Command Function