3Com Courier Reference Download Page 109

Page: 109 / 204

ISPLAYING

UERYING

AND

ELP

SCREENS

This chapter contains information about:

■

Querying

■

Displaying hel

To view screen captures of the help screens in the following chapter, see
Appendix B, Alphabetic Command Summary.

Overview

The Courier V.Everything modem can display information such as the
current settings, product code, and call duration.

Querying

Here is a complete list of ATI

commands.

Common Inquiry Commands

For your modem to display

Command

Current settings

ATI4

NVRAM settings

ATI5

Link diagnostics summary

ATI6

For your modem to

Command

Display a four-digit product code.

ATI0

Perform a checksum of the modem’s read-only
memory (ROM) and display the results. (This
function is used only in factory testing.)

The Courier V.Everything modem should always
display the same number.

ATI1

Summary of Contents for Courier













































































































































































































Search results

Summary of Contents for Courier

Reviews:

Related manuals for Courier

Brands by name

Popular brands

3Com Courier, Reference

Search results

Summary of Contents for Courier

Reviews:

Related manuals for Courier

Brands by name

Popular brands