3Com Courier, Reference

Page: 147 / 204

A complete list of S-Registers A-5
A complete list of
S-Registers
.
Register Default Function
S0 0 Sets the number of rings on which to answer in Auto Answer mode.
S0=0 disables Auto Answer. S0=1 enables Auto Answer and the
Courier V.Everything mode
answers on the first ring.
S1 0 Counts and stores the number of rings from an incoming call.
S2 43 Stores the ASCII decimal code for the escape code character. Default
character is “+”. A value of 128-255 disables the escape code.
S3 13 Stores the ASCII decimal code for the Carriage Return character. Valid
range is 0-127.
S4 10 Stores the ASCII decimal code for the Line Feed character. Valid range
is 0-127.
S5 8 Stores the ASCII decimal code for the Backspace character. A value of
128-255 disables the Backspace key's delete function.
S6 0 Set the number of seconds the Courier V.Everything modem waits for
a dial tone.
S7 60 Sets the number of seconds the Courier V.Everything modem waits for
a carrier. May be set for much longer duration if, for example, the
Courier V.Everything mode
is originating an international
connection.
S8 2 Sets the duration, in seconds, for the pause (,) option in the Dial
command and the pause between command reexecutions (> and A>
commands).
S9 6 Sets the required duration, in tenths of a second, of the remote
device's carrier signal before recognition by the Courier V.Everything
modem.
S10 14 Sets the duration, in tenths of a second, that the Courier V.Everything
modem waits after loss of carrier before hanging up. This guard time
allows the Courier V.Everything modem to distinguish between a line
hit, or other disturbance that momentarily breaks the connection,
from a true disconnect (hanging up) by the remote device
S11 70 Sets the duration and spacing, in milliseconds, of dialed tones.
S12 50 Sets the duration, in fiftieths of a second, of the guard time for the
escape code (+++) sequence.
S13 0 Bit-mapped register. See the beginning of this appendix for
information about setting bit-mapped registers.
Bit Value Result