3Com 8760 - Wireless Dual Radio 11a/b/g PoE Access Point, User Manual

Page: 55 / 261

4-15
Filter Control
AP Management Filter – Controls management access to the access point from
wireless clients. Management interfaces include the web, Telnet, or SNMP.
(Default: Disabled)
„
Disabled: Allows management access from wireless clients.
„
Enabled: Blocks management access from wireless clients.
Uplink Port MAC Address Filtering Status – Prevents traffic with specified source
MAC addresses from being forwarded to wireless clients through the access
point. You can add a maximum of eight MAC addresses to the filter table.
(Default: Disabled)
„
MAC Address: Specifies a MAC address to filter, in the form xx-xx-xx-xx-xx-xx.
„
Permission: Adds or deletes a MAC address from the filtering table.
Ethernet Type Filter – Controls checks on the Ethernet type of all incoming and
outgoing Ethernet packets against the protocol filtering table. (Default: Disabled)
„
Disabled: Access point does not filter Ethernet protocol types.
„
Enabled: Access point filters Ethernet protocol types based on the configuration
of protocol types in the filter table. If the status of a protocol is set to “ON,”
the protocol is filtered from the access point.
NOTE:
Ethernet protocol types not listed in the filtering table are always forwarded
by the access point.