3Com 8760 - Wireless Dual Radio 11a/b/g PoE Access Point, User Manual

Page: 196 / 261

5-94
C
HAPTER
5: C
OMMAND
L
INE
I
NTERFACE
bridge stp max-age
Use this command to configure the spanning tree bridge maximum age globally
for the wireless bridge. Use the
no form to restore the default.
Syntax
bridge stp max-age < seconds >
no bridge stp max-age
seconds - Time in seconds. (Range: 6-40 seconds)
The minimum value is the higher of 6 or [2 x (hello-time + 1)].
The maximum value is the lower of 40 or [2 x (forward-time - 1)].
Default Setting
20 seconds
Command Mode
Global Configuration
Command Usage
This command sets the maximum time (in seconds) a device can wait
without receiving a configuration message before attempting to reconfigure.
All device ports (except for designated ports) should receive configuration
messages at regular intervals. Any port that ages out STP information
(provided in the last configuration message) becomes the designated port
for the attached LAN. If it is a root port, a new root port is selected from
among the device ports attached to the network.
Example
bridge stp priority
Use this command to configure the spanning tree priority globally for the wireless
bridge. Use the
no form to restore the default.
Syntax
bridge stp priority < priority>
no bridge stp priority
priority - Priority of the bridge. (Range: 0 - 65535)
Enterprise AP(config)#bridge stp max-age 40
Enterprise AP(config)#