3Com 8760 - Wireless Dual Radio 11a/b/g PoE Access Point, User Manual

Page: 206 / 261

5-104
C
HAPTER
5: C
OMMAND
L
INE
I
NTERFACE
interface wireless
This command enters wireless interface configuration mode.
Syntax
interface wireless < a | g >
• a - 802.11a radio interface.
• g - 802.11g radio interface.
Default Setting
None
Command Mode
Global Configuration
Example
To specify the 802.11a interface, enter the following command:
ssid Configures the service set identifier IC-W-VAP 5-118
closed system Opens access to clients without a pre-configured
SSID IC-W-VAP 5-118
max-association Configures the maximum number of clients that can
be associated with the access point at the same time IC-W-VAP 5-119
assoc- timeout-interval Configures the idle time interval (when no frames are
sent) after which a client is disassociated from the
VAP interface IC-W-VAP 5-119
auth- timeout-value Configures the time interval after which clients must
be re-authenticated IC-W-VAP 5-120
shutdown Disables the wireless interface IC-W-VAP 5-120
show interface wireless Shows the status for the wireless interface Exec 5-121
show station Shows the wireless clients associated with the access
point Exec 5-125
Enterprise AP(config)#interface wireless a
Enterprise AP(if-wireless a)#
Command Function Mode Page