3Com 8760 - Wireless Dual Radio 11a/b/g PoE Access Point, User Manual

Page: 150 / 261

5-48
C
HAPTER
5: C
OMMAND
L
INE
I
NTERFACE
• host_name - Name of the host. (Range: 1-63 characters)
• community-string - Password-like community string sent with the
notification operation. Although you can set this string using the
snmp-server host command by itself, we recommend that you define
this string using the snmp-server community command prior to using
the snmp-server host command. (Maximum length: 23 characters)
Default Setting
Host Address: None
Community String: public
Command Mode
Global Configuration
Command Usage
The snmp-server host command is used in conjunction with the
snmp-server enable server command to enable SNMP notifications.
Example
Related Commands
snmp-server enable server (5-47)
snmp-server trap
This command enables the access point to send specific SNMP traps
(i.e., notifications). Use the
no form to disable specific trap messages.
Syntax
snmp-server trap < trap>
no snmp-server trap < trap>
• trap - One of the following SNMP trap messages:
- dot11InterfaceAFail - The 802.11a or 802.11g interface has failed.
- dot11InterfaceGFail - The 802.11b/g interface has failed.
- dot11StationAssociation - A client station has successfully associated
with the access point.
- dot11StationAuthentication - A client station has been successfully
authenticated.
- dot11StationReAssociation - A client station has successfully
re-associated with the access point.
Enterprise AP(config)#snmp-server host 1 10.1.19.23 batman
Enterprise AP(config)#