3Com 8760 - Wireless Dual Radio 11a/b/g PoE Access Point, User Manual

Page: 61 / 261

4-21
SNMP
„
dot11InterfaceAFail - The 802.11a or 802.11g interface has failed.
„
dot1xMacAddrAuthSuccess - A client station has successfully authenticated its
MAC address with the RADIUS server.
„
dot1xMacAddrAuthFail - A client station has failed MAC address
authentication with the RADIUS server.
„
dot1xAuthNotInitiated - A client station did not initiate 802.1X authentication.
„
dot1xAuthSuccess - A 802.1X client station has been successfully
authenticated by the RADIUS server.
„
dot1xAuthFail - A 802.1X client station has failed RADIUS authentication.
„
localMacAddrAuthSuccess - A client station has successfully authenticated its
MAC address with the local database on the access point.
„
localMacAddrAuthFail - A client station has failed authentication with the local
MAC address database on the access point.
„
sntpServerFail - The access point has failed to set the time from the configured
SNTP server.
C
ONFIGURING
SNMP
V
3 U
SERS
The access point allows up to 10 SNMP v3 users to be configured. Each user must
be defined by a unique name, assigned to one of three pre-defined security
groups, and configured with specific authentication and encryption settings.
Figure 28 Configuring SNMPv3 Users
User – The SNMPv3 user name. (32 characters maximum)
Group – The SNMPv3 group name. (Options: RO, RWAuth, or RWPriv; Default:
RO)
„
RO – Read-only access.
„
RWAuth – Read/write access with user authentication.
„
RWPriv – Read/write access with both user authentication and data encryption.
Auth Type – The authentication type used for the SNMP user; either MD5 or
none. When MD5 is selected, enter a password in the corresponding Passphrase
field.
Priv Type – The data encryption type used for the SNMP user; either DES or none.
When DES is selected, enter a key in the corresponding Passphrase field.