3Com 8760 - Wireless Dual Radio 11a/b/g PoE Access Point, User Manual

Page: 218 / 261

5-116
C
HAPTER
5: C
OMMAND
L
INE
I
NTERFACE
Default Setting
2347
Command Mode
Interface Configuration (Wireless)
Command Usage
• If the threshold is set to 0, the access point always sends RTS signals. If set
to 2347, the access point never sends RTS signals. If set to any other value,
and the packet size equals or exceeds the RTS threshold, the RTS/CTS
(Request to Send / Clear to Send) mechanism will be enabled.
• The access point sends RTS frames to a receiving station to negotiate the
sending of a data frame. After receiving an RTS frame, the station sends a
CTS frame to notify the sending station that it can start sending data.
• Access points contending for the wireless medium may not be aware of
each other. The RTS/CTS mechanism can solve this “Hidden Node”
problem.
Example
super-a
This command enables Atheros proprietary Super A performance enhancements.
Use the
no form to disable this function.
Syntax
[ no ] super-a
Default Setting
Disabled
Command Mode
Interface Configuration (Wireless - 802.11a)
Command Usage
Super A enhancements include bursting, compression, and fast frames.
Maximum throughput ranges between 40 to 60 Mbps for connections to
Atheros-compatible clients.
Enterprise AP(if-wireless g)#rts-threshold 256
Enterprise AP(if-wireless g)#