Configuring TP
229
Configuring TP
Refer to T for the introduction to TP.
Configuration
Prerequisites
■
ACL rules used for traffic identifying are defined. Refer to the
ACL
module in the
book for defining ACL rules
■
The limit rate for TP, the actions for the packets within the specified traffic and the
actions for the packets beyond the specified traffic have been specified.
■
Whether statistics is performed on TP is determined
■
The ports that needs this configuration is specified
Configuration Procedure
of TP
acl-rule
: Issued ACL rules which can be the combination of various ACL rules. The way
of combination is described in
Table 196
.
Displaying the Statistics
of TP
Table 195
Configuring TP
Operation
Command
Description
Enter system view
system-view
-
Enter Ethernet port view
interface
interface-type
interface-number
-
Use ACL rules in traffic
identifying, perform traffic
policing for the packets
matching with the ACL
rules and set traffic policing
parameters.
traffic-limit
inbound
acl-rule target-rate
-
Display the parameter
configurations of traffic
policing
display qos-interface
{
interface-type
interface-num
|
unit-id
}
traffic-limit
Optional
You can execute the
display
command
in any view
Display all the QoS settings
of the port
display qos-interface
{
interface-type
interface-num
|
unit-id
}
all
Table 196
The ways of issuing combined ACLs
The way of combination
The form of
acl-rule
Issue all the rules in an IP ACL separately
ip-group
acl-number
Issue a rule in an IP ACL separately
ip-group
acl-number
rule
rule
Issue all the rules in a Link ACL separately
link-group
acl-number
Issue a rule in a Link ACL separately
link-group
acl-number
rule
rule
Issue a rule in an IP ACL and a rule in a Link
ACL at the same time
ip-group
acl-number
rule
rule
link-group
acl-number
rule
rule
Table 197
Clearing the statistics of TP
Operation
Command
Description
Enter system view
system-view
-
Enter Ethernet port view
interface
interface-type
interface-number
-
Clear the statistics of the TP
matching with the
specified ACL rules
reset traffic-limit
inbound
acl-rule
Required
The clearing function is effective only
when the TP statistics function is
configured
Summary of Contents for 4200G 12-Port
