3Com 4200G 12-Port, Configuration Manual

Page: 410 / 422

396 C
HAPTER
46: DHCP R
ELAY
C
ONFIGURATION
You can configure an interface to forward DHCP packets received from DHCP clients
to a group of external DHCP server(s), so that the DHCP server(s) in this group can
assign IP addresses to the DHCP clients under this interface.
You can configure up to eight external DHCP IP addresses in a DHCP server group.
You can map multiple VLAN interfaces to one DHCP server group. But one VLAN
interface can be mapped to only one DHCP server group. If you execute the
dhcp-server groupNo command repeatedly, the new configuration overwrites the
previous one.
The group number referenced in the dhcp-server groupNo command must has
already been configured by using the dhcp-server groupNo ip ipaddress1 [
ipaddress-list ] command.
Configuring DHCP Relay
Security
Configuring address checking
When a DHCP client obtain an IP address from a DHCP server with the help of a DHCP
relay, the DHCP relay creates an entry (dynamic entry) in the user address table to
track the IP-MAC address binding information about the DHCP client. You can also
configure user address entries manually (static entries) to bind an IP address and a
MAC address statically.
The purpose of the address checking function on DHCP relay is to prevent
unauthorized users from statically configuring IP addresses to access external
networks. With this function enabled, a DHCP relay inhibits a user from accessing
external networks if the IP address configured on the user end and the MAC address
of the user end do not match any entries (including the entries dynamically tracked by
the DHCP relay and the manually configured static entries) in the user address table
on the DHCP relay.
Table 339 Configure an interface to operate in DHCP relay mode
Operation Command Description
Enter system view system-view —
Configure the DHCP
server IP address(es) in
a specified DHCP server
group dhcp-server groupNo ip
ip-address1 [ ipaddress-list ]
Required
By default, no DHCP server IP
address is configured in a DHCP
server group.
Map an interface to a
DHCP server group interface interface-type
interface-number
Required
By default, a VLAN interface is not
mapped to any DHCP server group.
dhcp-server groupNo
Table 340 Configure address checking
Operation Command Description
Enter system view system-view —
Create a DHCP user
address entry manually dhcp-security static
ip-address mac - address
Optional
By default, there is no manually
configured DHCP user address
entry.
Enter interface view interface interface-type
interface-number
—
Enable the address
checking function address-check enable Required
By default, the address checking
function is disabled.